Waco · Woodway · Hewitt · Robinson · Bellmead · Lacy-LakeviewWaco’s own electrician Call (254) 327-1844
League Electric
Service · Dedicated circuits

240-volt circuit installation

If you need a 240-volt circuit for a range, a dryer, a welder, a shop, or a hot tub, the first question isn't the receptacle. It's whether your panel can handle it. I own League Electric, and we'll tell you that straight before we pull any wire.

Book online Request an estimate (254) 327-1844

League Electric van driving down a small-town Texas main street with a ladder on the roof rack

Why a regular outlet won't do

Most of the outlets in your house are 120-volt. That's fine for lamps and a coffee pot. Bigger equipment — electric ranges, many dryers, welders, air compressors, some shop tools, and a lot of hot tubs — needs a dedicated 240-volt circuit, sized for that load, with the right breaker and the right receptacle.

Plugging a heavy load into the wrong circuit, or sharing it with a bunch of other things, is how you get a breaker that won't stay on and a job nobody wanted. We'd rather install it once, the right way.

We check the panel first

Every one of these jobs starts at the electrical panel. Does it have physical space for the new breaker? Does the service have enough capacity for the new load plus what you already run? Sometimes the answer is yes, and we run the circuit. Sometimes a small subpanel is the cleaner move. Sometimes the honest answer is a panel upgrade first.

If the panel is a fuse box or an older brand we recommend replacing, I'll point you to our outdated panel page and we'll talk about doing that work in the right order. I won't sell you a 240-volt circuit on a panel that shouldn't take it.

Planning a Level 2 EV charger? That's a 240-volt job too, and it has its own page because the layout, the amperage, and the charger itself have a few extra questions. Use that page for charging. Use this one for ranges, dryers, shops, and similar equipment.

Jobs we get called for around here

A new electric range or cooktop in a kitchen remodel. A dryer in a garage or a laundry room that only has a 120-volt outlet. A welder or compressor in a backyard shop. A hot tub on a patio that needs a proper hookup, GFCI protection, and a disconnect where the code expects one.

We also run 240-volt circuits for other household equipment when it's called for — things like certain water heaters or shop heaters — after we look at the nameplate and the panel. Bring the model number or a photo of the label if you have it. That saves a second trip.

Garages, shops, and a little room to grow

Out toward McGregor, China Spring, Lorena, and the county roads around Waco, we see a lot of detached shops and garage workshops. Those buildings often need more than one circuit: lighting, a couple of 120-volt outlets, and a 240-volt receptacle for the tool you actually bought the shop for.

If you're building or finishing a shop, tell us how you think you'll use it, not just what you own today. Running a second conduit or leaving a little space in a subpanel is a lot cheaper than opening the wall again next year. We can talk through that without turning it into a bigger project than you want.

Permits and what to have ready

A new 240-volt circuit generally needs a permit and an inspection. We confirm that for your address and handle the paperwork when it's required, whether you're in Waco, Woodway, or one of the nearby towns.

When you call, it helps to know: what the equipment is, where it will sit, and whether the path back to the panel is a garage, an attic, or a finished room. Photos of the panel and the install spot are plenty. Some of these circuits are a few hours of work. If the panel has to be upgraded first, that's a bigger day, and we'll say so up front.

Give us a call

We're a family-owned shop on Broad Avenue in Woodway, licensed in Texas (TECL #32044) and insured. Hours are Monday through Saturday, 6:30 AM to 5:00 PM, closed Sunday.

Call (254) 327-1844, book online, or request an estimate. — League Electric

What’s included

  • Dedicated 240-volt circuits for ranges and cooktops
  • Dryer circuits and laundry-room hookups
  • Shop, welder, and compressor circuits
  • Hot tub electrical hookups, including required protection
  • Panel capacity check before we run the circuit
  • Permit and inspection handling when required

Serving Waco & nearby

Looking for 240-volt circuit installation near you? League Electric is a family-owned electrician in Waco, TX and an electrician in Woodway, TX, with a master electrician on the team.

Waco · Hewitt · Robinson · Bellmead · Woodway · Lacy-Lakeview · McGregor · China Spring · Lorena

See all service areas · Residential · Commercial

FAQs

What's the difference between a 120-volt and a 240-volt circuit?

Most household outlets are 120-volt. A 240-volt circuit is a dedicated, higher-capacity circuit for larger equipment like many ranges, dryers, welders, and hot tubs. It uses a different breaker and receptacle, sized for that load.

Can my panel handle a new 240-volt circuit?

It depends on the panel's capacity and whether there's room for the breaker. We check that first. If the panel is full or outdated, we'll tell you the options before we run the circuit.

Do you install EV charger circuits too?

Yes. A Level 2 charger is a 240-volt job, and we have a separate page for EV charger installation because those projects have a few extra layout and amperage questions.

Do you hook up hot tubs?

Yes. We install the dedicated circuit, the required protection, and the disconnect, and we check the panel first. Have the hot tub's electrical label handy if you can.

Do I need a permit for a 240-volt circuit in Waco or Woodway?

A new 240-volt circuit generally needs a permit and an inspection. We confirm what applies to your address and handle the paperwork when it's required.

Stay in the loop

Your neighborhood discount.

15% off your first service call, and 1 hour off jobs of 4 or more hours on site. Join our email list and we’ll email you the details. No spam.

Terms apply. Details sent by email.

Your neighborhood electrician

Well, howdy.
Let’s get to work.

Tell us what’s on your list — homes and businesses around Waco welcome.

Give us a holler

(254) 327-1844